< Previous   Next >

2014 - Mazda6 - Body and Accessories

PID/DATA MONITOR TABLE [FRONT BODY CONTROL MODULE (FBCM)]

—: Not applicable

PID

Unit/Operation

Data contents

Data read/use method

Inspection item(s)

ABK_CS_BG*1

Off/On

  • Off: Theft-deterrent system answer-back signal is not received.

  • On: Theft-deterrent system answer-back signal is received.

  • Front body control module (FBCM)

  • Rear body control module (RBCM)

  • Start stop unit

ABK_CS_KEY

Off/On

  • Off: Keyless entry system answer-back signal is not received.

  • On: Keyless entry system answer-back signal is received.

  • Front body control module (FBCM)

  • Rear body control module (RBCM)

  • Start stop unit

ABK_HD_CS_R

Off/On

NOTE:

  • It is displayed, however, if an accessory part is installed, it cannot be used.

ABK_HN_CS_R

Off/On

NOTE:

  • It is displayed, however, if an accessory part is installed, it cannot be used.

ABK_HN_KEY

Off/On

  • Off: Keyless entry system horn answer-back signal is not received.

  • On: Keyless entry system horn answer-back signal is received.

  • Front body control module (FBCM)

  • Rear body control module (RBCM)

  • Start stop unit

BAT_TMP

°C, °F

Displays battery temperature

Battery

BG_ALARM_CS*1

Off/On

  • Off: Hazard warning light flashing request siganal is not received

  • On: Hazard warning light flashing request siganal is received

  • Front body control module (FBCM)

  • Rear body control module (RBCM)

BLWR_MT_RY

Off/On

  • Off: Blower relay is off.

  • On: Blower relay is on.

Blower relay

BRAKE_SW

Off/On

  • Off: Brake switch (No. 2 signal) is off. (Brake pedal is depressed.)

  • On: Brake switch (No. 2 signal) is on. (Brake pedal is not depressed.)

  • Brake switch

  • PCM

  • TCM

BRK_F_L_SW

Normal/Low/Unknown

  • Normal: Brake fluid level is between MAX and MIN.

  • Low: Brake fluid level is lower than MIN.

  • Unknown: Brake fluid level is not determined.

Brake fluid level sensor

DCDC_CVT_ST

NOTE:

  • Displays in the M-MDS but it does not operate.

DCDC_VLT_I

NOTE:

  • Displays in the M-MDS but it does not operate.

DCDC_VLT_O

NOTE:

  • Displays in the M-MDS but it does not operate.

DEFOG_F_CS

NOTE:

  • Displays in the M-MDS but it does not operate.

DEFOG_R_CS

Off/On

  • Off: Rear window defroster control signal is not received.

  • On: Rear window defroster control signal is received.

  • Front body control module (FBCM)

  • Climate control unit

ENG_C_TMP

°C, °F

Displays engine coolant temperature

  • ECT sensor

  • PCM

ESS_ST

NOTE:

  • Displays in the M-MDS but it does not operate.

F_FOG_LMP*2

Off/On

  • Off: Front fog light is turned off.

  • On: Front fog light is turned on.

Front fog light

F_FOG_SW*2

Off/On

  • Off: Front fog light switch F.FOG signal is not received.

  • On: Front fog light switch F.FOG signal is received.

  • Front fog light switch

  • Start stop unit

H/L

OFF/DRL/TNS/H/L_LOW/H/L_HI/

  • OFF: Headlight is turned off.

  • DRL: DRL is turned on.

  • TNS: TNS is turned on.

  • H/L_LOW: Headlight (LO) is turned on.

  • H/L_HI: Headlight (HI) is turned on.

  • Headlight relay (HI)/(LO)

  • Parking light

  • Taillight

  • License plate light

  • DRL

H/L_CLN_RY

NOTE:

  • Displays in the M-MDS but it does not operate.

H/L_CS_RLS*3

Off/TNS_On/TNS+H/L_On

  • Off: TNS and headlight on request signal is not received from auto light sensor.

  • TNS_On: TNS on signal is received from auto light sensor.

  • TNS+H/L_On: TNS and headlight LO on signal is received from auto light sensor.

Auto light sensor

H/L_HI

Off/On

  • Off: Headlight HI is turned off.

  • On: Headlight HI is turned on.

Headlight HI

H/L_SW_HI

Off/On

  • Off: Light switch HI signal is not received.

  • On: Light switch HI signal is received.

  • Light switch

  • Start stop unit

H/L_SW_LOW1

Off/On

Displays dimmer switch position of light switch sent from start stop unit via CAN signal

  • Off: Other than dimmer switch LO position of light switch is received

  • On: Dimmer switch LO position of light switch is received

Verify if the monitor value switches when the dimmer switch of the light switch is switched between LO and HI positions. If the dimmer switch operation and monitor values do not match, inspect the start stop unit or CAN communication.

  • Light switch

  • Start stop unit

H/L_SW_OFF

Off/On

  • Off: Light switch OFF signal is not received.

  • On: Light switch OFF signal is received.

  • Light switch

  • Start stop unit

H/L_SW_PASS

Off/On

  • Off: Light switch FLASH-TO-PASS signal is not received.

  • On: Light switch FLASH-TO-PASS signal is received.

  • Light switch

  • Start stop unit

H/L_SW_TNS

Off/On

  • Off: Light switch TNS signal is not received.

  • On: Light switch TNS signal is received.

  • Light switch

  • Start stop unit

H/L_TNS

Off/On

  • Off: TNS is turned off.

  • On: TNS is turned on.

  • Parking light

  • Taillight

  • License plate light

HAZARD_LMP

Off/On

  • Off: Hazard light is turned off.

  • On: Hazard light is turned on.

  • Front turn light

  • Side turn light

  • Rear turn light

HAZARD_SW

Off/On/Unknown

  • Off: Hazard warning switch is not pressed.

  • On: Hazard warning switch is pressed.

  • Unknown: Hazard warning switch on/off is not determined.

  • Hazard warning switch

  • Start stop unit

HBC_CS*4

Off/On/Invalid

  • Off: High beam control (HBC) system signal is not received.

  • On: High beam control (HBC) system signal is received.

  • Invalid: High beam control (HBC) system signal has error.

Forward sensing camera (FSC)

HBC_ST*4

Off/On

  • Off: High beam control (HBC) system is not operated.

  • On: High beam control (HBC) system is operated.

Forward sensing camera (FSC)

HEAT_CS_R

NOTE:

  • Displays in the M-MDS but it does not operate.

IG_ST

Off/On

  • Off: IG1 is off.

  • On: IG1 is on.

  • IG1 relay

  • PCM

  • Start stop unit

L_OFF_AUTO

Off/On

  • Off: TNS or headlight off control by auto light off system is not operated.

  • On: TNS or headlight off control by auto light off system is operated.

  • Front body control module (FBCM)

  • Auto light sensor

L_OFF_BS

NOTE:

  • Displays in the M-MDS but it does not operate.

OIL_P_SW

NOTE:

  • Displays in the M-MDS but it does not operate.

OUT_CAR_TMP

°C, °F

Displays ambient temperature

  • Ambient temperature sensor

  • PCM

P_BRAKE_SW

Off/On

  • Off: Parking brake switch is off. (Parking brake lever is not pulled.)

  • On: Parking brake switch is on. (Parking brake lever is pulled.)

  • Parking brake switch

  • Instrument cluster

PNC_CS

Off/On

  • Off: Panic control signal is not received.

  • On: Panic control signal is received.

  • Front body control module (FBCM)

  • Rear body control module (RBCM)

PNC_HD_CS_R

Off/On

NOTE:

  • It is displayed, however, if an accessory part is installed, it cannot be used.

PNC_HN_CS_R

Off/On

NOTE:

  • It is displayed, however, if an accessory part is installed, it cannot be used.

PTC_HEAT_CS

NOTE:

  • Displays in the M-MDS but it does not operate.

R_FOG_LMP

NOTE:

  • Displays in the M-MDS but it does not operate.

R_FOG_SW

NOTE:

  • Displays in the M-MDS but it does not operate.

RES_CS

Off/On

NOTE:

  • It is displayed, however, if an accessory part is installed, it cannot be used.

RLS_FLT*3

O.K./FAULT

  • OK: Rain sensor is normal.

  • FAULT: Rain sensor has a malfunction.

Rain sensor

S_HT_CUT*5

No_Request/Cut

  • No_Request: Except below

  • Cut: Seat warmer is turned off or lowered.

Front body control module (FBCM)

SHIFT_L_POS*6

Between/P/R/N/D/S(2)/L(1)

  • Between: Selector lever is between two positions.

  • P: Selector lever is in P position.

  • R: Selector lever is in R position.

  • N: Selector lever is in N position.

  • D: Selector lever is in D position.

  • S(2): Selector lever is in D position 2nd gear.

  • L(1): Selector lever is in D position 1st gear.

TCM

TURN_L_L

Off/On

  • Off: Turn light (LH) is turned off.

  • On: Turn light (LH) is turned on.

  • Front turn light

  • Side turn light

  • Rear turn light

TURN_L_R

Off/On

  • Off: Turn light (RH) is turned off.

  • On: Turn light (RH) is turned on.

  • Front turn light

  • Side turn light

  • Rear turn light

TURN_SW

Off/Turn_R_On/Turn_L_On/Unknown

  • Off: Turn switch is in OFF position.

  • Turn_R_On: Turn switch is in RH position.

  • Turn_L_On: Turn switch is in LH position.

  • Unknown: Turn switch position is not determined.

  • Turn Switch

  • Start stop unit

VPWR_B

V

Displays front body control module (FBCM) power supply voltage

Front body control module (FBCM)

VSPD

KPH, MPH

Displays vehicle speed

PCM

WAS_FLUID_L

Normal/Low/Unknown

  • Normal: Washer fluid level is normal.

  • Low: Washer fluid level is low.

  • Unknown: Washer fluid level is not determined.

Washer fluid-level sensor

WAS_MT_RY_F

Off/On

  • Off: Windshield washer motor relay is off.

  • On: Windshield washer motor relay is on.

Front body control module (FBCM)

WAS_MT_RY_R

NOTE:

  • Displays in the M-MDS but it does not operate.

WASHER_F

Off/On

  • Off: Windshield washer switch is off.

  • On: Windshield washer switch is on.

  • Windshield washer switch

  • Start stop unit

WASHER_R

NOTE:

  • Displays in the M-MDS but it does not operate.

WIP_CS_RLS*3

Off/Single_Wipe/F_Wiper_LOW/F_Wiper_HI/Failure

  • Off: Wiper operation signal is not received from rain sensor.

  • Single_Wipe: Signal to operate wiper once is received from rain sensor.

  • F_Wiper_LOW: Signal to operate wiper at low speed is received from rain sensor.

  • F_Wiper_HI: Signal to operate wiper at high speed is received from rain sensor.

  • Failure: Communication with rain sensor is failed.

Rain sensor

WIP_F

OFF/LOW/HI/INT / AUTO

  • OFF: Windshield wiper switch is in OFF position.

  • LOW: Windshield wiper switch is in LO position.

  • HI: Windshield wiper switch is in HI position.

  • INT / AUTO: Windshield wiper switch is in INT or AUTO position.

  • Windshield wiper switch

  • Start stop unit

WIP_F_INT_L

%

Displays windshield wiper INT level signal value received

  • Windshield wiper switch

  • Start stop unit

WIP_F_LOW

Off/On

  • Off: Windshield wiper switch is not in LO position.

  • On: Windshield wiper switch is in LO position.

  • Windshield wiper switch

  • Start stop unit

WIP_F_MST

Stop/Move

  • Stop: Autostop switch is on.

  • Move: Autostop switch is off.

Windshield wiper motor

WIP_F_RY_HI

Off/On

  • Off: Windshield wiper HI relay is off.

  • On: Windshield wiper HI relay is on.

Front body control module (FBCM)

WIP_F_RY_LO

Off/On

  • Off: Windshield wiper LO relay is off.

  • On: Windshield wiper LO relay is on.

Front body control module (FBCM)

WIP_R

NOTE:

  • Displays in the M-MDS but it does not operate.

WIP_R_RY

NOTE:

  • Displays in the M-MDS but it does not operate.


*1
With theft-deterrent system
*2
With front fog light
*3
With auto light sensor/rain sensor
*4
With high beam control (HBC) system
*5
With seat warmer
*6
ATX


< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.